Hünerli Metal provides standing seam facade cladding services in Denizli, creating architectural metal cladding solutions for residential and commercial buildings. We carry out aluminum sheet cutting, bending, and standing seam preparation at our own workshop, coordinating each stage from the initial site survey to fabrication and installation through the same team.

Standing seam facades are used in villas, residential properties, commercial buildings, and contemporary architectural projects. Their continuous metal seams create a distinctive surface appearance. At Hünerli Metal, we work with RAL 7022 and RAL 9006 aluminum standing seam materials, offering site surveys and on-site measurements to determine suitable applications for each building.

What Is Standing Seam Facade Cladding?

Standing seam facade cladding is an exterior wall covering system in which adjacent metal sheets are connected through specially formed seam joints.

These joints create continuous lines across the facade, providing a consistent architectural pattern.

Standing seam systems can be used on both roofs and external walls. However, roofing and facade applications have different substructure, fixing, and water management requirements.

Standing seam facade cladding can be considered for:

Villa facades: Architectural metal surfaces for contemporary residential designs.
Detached houses: Metal cladding on selected exterior walls.
Commercial buildings: Metal facade applications for offices, stores, and business properties.
Architectural projects: Coordinated material transitions between roofing and exterior walls.
Facade renovations: Existing buildings with suitable structural and fixing conditions.

Selecting the correct metal sheet is only one part of a standing seam facade project.

The existing wall condition, supporting structure, fastening method, and junction details must also be evaluated.

Our Standing Seam Facade Systems

Hünerli Metal focuses on preparing and installing aluminum standing seam components according to the architectural characteristics of each project.

Aluminum Standing Seam Facades

Aluminum standing seam facades use aluminum sheets connected through formed seam joints.

Aluminum's formability makes it suitable for different architectural cladding arrangements.

Sheet dimensions, seam orientation, and fixing details are determined according to project specifications.

We work with RAL 7022 and RAL 9006 aluminum standing seam materials.

Metal cutting and bending operations are carried out at our workshop, where we also use our standing seam seaming robot.

Vertical Standing Seam Facades

Vertical standing seam applications use metal seams that run vertically across the facade surface.

This arrangement can create a distinctive architectural rhythm, particularly on taller exterior walls.

Seam spacing, sheet widths, and junctions should be established according to the dimensions and design of the building.

Window surrounds, external corners, and roof transitions also require careful detailing.

Horizontal Standing Seam Facades

Horizontal standing seam applications create lines running across the width of a building facade.

This arrangement may be considered where the architectural design calls for a different metal surface pattern.

Water drainage, seam orientation, and supporting framework requirements are particularly important in horizontal applications.

Not every standing seam system is suitable for horizontal installation. The technical limitations of the selected system should be reviewed during project planning.

Standing Seam Facades with Aluminum Sunshades

Standing seam facade cladding can be combined with aluminum sunshade profiles when appropriate for the architectural design.

Sunshade elements are used to help manage solar exposure while contributing to the building's exterior appearance.

Profile spacing, orientation, and fixing requirements should be evaluated according to the facade design and sun exposure.

Hünerli Metal's completed work includes an RAL 7022 aluminum standing seam facade combined with aluminum sunshade profiles.

Materials and Color Options

Material selection and surface finish influence the appearance and detailing of standing seam facades.

Hünerli Metal works with the following colors in its aluminum standing seam applications.

RAL 7022 Aluminum Standing Seam

RAL 7022 is a dark gray finish that can be considered for architectural designs featuring prominent metal surfaces.

We have used this color in an aluminum standing seam facade project that also included aluminum sunshade profiles.

RAL 9006 Aluminum Standing Seam

RAL 9006 provides a lighter metallic gray appearance suitable for different architectural applications.

Color selection should consider the building's roof covering, window frames, and surrounding exterior materials.

Other Architectural Metal Materials

Hünerli Metal also works with 0.60 mm painted galvanized steel sheets, RAL 7016 anthracite, VMZinc titanium zinc, and copper in its metal roofing and cladding work.

The suitability of these materials for a particular facade application must be assessed according to the selected system and its technical requirements.

For projects involving coordinated roof and facade cladding, explore our steel roofing and standing seam roofing services.

Our Standing Seam Facade Installation Process

Hünerli Metal coordinates site measurements, workshop fabrication, and installation through the same team.

Site survey and on-site measurements: We inspect the building exterior and measure the areas requiring cladding. Existing surfaces, fixing locations, window openings, and architectural details are evaluated.
Project and material planning: We determine the aluminum standing seam material, color, seam orientation, and sheet dimensions. Substructure requirements, corner details, and connections are planned according to the project's technical specifications.
Workshop fabrication: Metal sheets are cut, bent, and prepared at our workshop. We use our standing seam seaming robot as part of the relevant fabrication process.
On-site installation and handover: Prepared metal cladding components are installed at the project location. Seam joints, corners, and connection details are checked before completing the work.

This coordinated approach allows customers to communicate with a single team throughout the project.

What Determines Standing Seam Facade Prices in Denizli?

Standing seam facade prices depend on the total cladding area, selected materials, and fabrication and installation requirements.

Two buildings with similar facade areas may have different costs because of their architectural geometry and connection details.

Main factors affecting standing seam facade costs include:

Total facade area
Aluminum sheet specifications
Seam orientation and sheet arrangement
Facade geometry
Window and door openings
Corners and custom metal junctions
Supporting substructure and fixing requirements
Building height and installation accessibility
Integration with aluminum sunshade systems
Preparation required for an existing facade
Transportation and project location

When reviewing prices per square meter, the metal sheet cost alone is not sufficient.

Supporting structures, custom fabrication, and installation work should also be included in the project assessment.

Hünerli Metal offers site surveys and on-site measurements to evaluate requirements and prepare a quotation based on the selected system and scope of work.

You can request a site survey and quotation by sharing your project details.

Why Choose Hünerli Metal?

Standing seam facade projects require accurate sheet preparation, properly executed seam connections, and coordinated architectural detailing.

At Hünerli Metal, we carry out the primary metal fabrication operations at our workshop.

Single point of contact: Site surveys, fabrication, and installation are managed by the same team.
In-house workshop: We perform metal cutting, bending, welding, and painting operations.
Standing seam equipment: We use our standing seam seaming robot for relevant applications.
Attention to architectural details: Corner transitions, metal joints, and roof-to-facade connections are prepared according to project requirements.
Experience with different metal systems: Our work includes metal roofing and facade cladding applications.

Our completed RAL 7022 aluminum standing seam facade and sunshade application is an example of this work.

You can explore additional metalwork on our projects page.

Our Service Areas

Hünerli Metal is a metal fabrication and cladding company based in Denizli, Türkiye.

We evaluate standing seam facade projects throughout Denizli, including Merkezefendi, Pamukkale, Honaz, and other districts.

Our roofing and architectural metalwork also extends to Muğla, Bodrum, and the wider Aegean Region.

If you are considering standing seam facade cladding for a villa, house, retail property, or commercial building, contact us with your project location and requirements.

Frequently Asked Questions

What is the difference between standing seam and composite panel facades?

Standing seam facades use metal sheets joined through specially formed seams, creating continuous lines across the surface. Composite panel facades use individual panels with a different joint arrangement. Material construction, fixing methods, and installation details differ between the two systems.

Are standing seam facades waterproof?

A properly designed standing seam facade incorporates suitable rainwater management details. However, water resistance depends on the seam joints, supporting system, window surrounds, and other junctions. Not every standing seam cladding system should be assumed to provide complete waterproofing on its own.

Can standing seam cladding be installed on an existing building?

Standing seam facade cladding may be installed on existing buildings when structural and fixing conditions are suitable. The supporting framework and installation details must be evaluated in advance. A site survey helps establish the condition of the existing exterior walls.

What colors are available for aluminum standing seam facades?

Hünerli Metal works with RAL 7022 and RAL 9006 aluminum standing seam materials. The appropriate finish should be considered together with the building's architecture and other exterior materials. Final selection is confirmed during project planning.

How are standing seam facade prices calculated per square meter?

Pricing depends on facade area, aluminum material specifications, supporting structures, and installation requirements. Corners, window surrounds, and custom metal connections can affect fabrication costs. An accurate quotation requires project evaluation and on-site measurements.

If you are planning standing seam facade cladding in Denizli for a villa, residential property, store, or commercial building, contact Hünerli Metal to discuss your project.

We provide site surveys and on-site measurements, preparing quotations according to the aluminum standing seam system, fabrication requirements, and installation conditions.

Call +90 554 897 11 50 or +90 507 573 72 67 to discuss your facade cladding project.